Agulles Kila 16G – Corbes amb recobriment (Caixa – 50 agulles)

• Tipus: Curved coated piercing needles
• Material: 316L surgical steel with silicone coating
• Calibre 16G
• Sterilisation: Ethylene oxide (EO)
• Packaging: Individually sealed, 50 needles per box
• Traceability: Lot and expiry printed on every unit
• Certification: EU Declaration of Conformity
• Design: Designed in Italy by professional piercers

For anatomy that will not take a straight shaft. Navel, surface, the tighter ear placements. The curve follows the anatomy for you, so your wrist stays neutral and you keep the angle you planned.

A shaped needle is the clearest proof of who designed this line: nobody draws one unless they have stood there needing it.

Designed by piercers. Not by a factory.

KILA was designed in Italy by professional piercers — people who pierce for a living, and who had spent years working with needles designed by someone who never had.

That single fact explains everything else on this page. A factory optimises cost per unit. A piercer optimises the pass. The two lead to opposite decisions, and you can feel all three of them on the tray:

• A silicone membrane over the steel. Coating a needle costs money. It also stops the drag, keeps the channel clean and makes the hand-off to the jewellery smooth. A piercer decides that is worth paying for. A purchasing department decides it is not.
• Ethylene oxide, not gamma. EO sterilises at low temperature, so the bevel geometry and the coating come out exactly as they went in. Gamma is cheaper and harder on coatings. This is a choice made by someone who has felt the difference on the hundredth pass of the day.
• Lot and expiry on every wrapper. Not on the box — on each of the hundred needles inside it. Printing a label on one carton is easy. Printing it a hundred times is what a piercer asks for, because the piercer is the one standing in front of a health inspector holding a single needle.

Certification and documentation

KILA carries an EU Declaration of Conformity, issued in Italy under Directive 2001/95/EC on general product safety. Risk analysis was carried out by the HAZOP method (IEC 61882:2016) and residual risk calculated by LOPA (IEC 61511-1:2016). Twelve-month warranty against manufacturing defects.

Both the declaration and the complete instruction manual are published on this site. You can read them before you order, not after it arrives.

Ask your current needle supplier for the same two documents. Most will not have them ready, and that tells you something.

The rest of the range

KILA hooked needles, and straight needles in 1 inch · 2 inches · 3 inches.

Storage and handling

Store between 18-22 °C at 35-50% relative humidity, indoors, away from steam, direct sunlight and heat. Check the expiry before use, open the wrapper at the moment of the procedure, and never let the tip touch a non-sterile surface. Single use, always.

KILA needles are a professional piercing tool, not a medical device, and are not intended for medical or aesthetic-medical treatments. For trained professionals only.

Download the documents

EU Declaration of Conformity (PDF) · Instruction manual, EN (PDF)

Enviament

Vaixells des de Barcelona amb DHL Express. Enviament gratuït a tot el món per comandes superiors a 350 €.