Kila igle – 2,5 cm – (Kutija – 100 igala) – Ravne

SKU N/A Kategorija Oznake , , , Marka:
€ 200.00

Straight piercing needles
Material: 316L surgical steel with silicone coating
Mjerač: 16G – 14G
Length: 1 inch – 2.54 cm
Sterilisation: Ethylene oxide (EO)
Packaging: Individually sealed, 100 needles per box
Certification: EU Declaration of Conformity
Design: Designed in Italy by professional piercers

Sigurno za autoklaviranje
Doživotno jamstvo
Globalna dostava s DHL Expressom
Pristup samo za profesionalce

Opis

  • Tip: Straight piercing needles
  • Materijal: 316L surgical steel with silicone coating
  • Mjerač: 16G – 14G
  • Duljina: 1 inch – 2.54 cm
  • Sterilisation: Ethylene oxide (EO)
  • Packaging: Individually sealed, 100 needles per box
  • Traceability: Lot and expiry printed on every unit
  • Certification: EU Declaration of Conformity
  • Design: Designed in Italy by professional piercers

The short one. One inch gives you maximum control where the channel is shallow — lobe, helix, tragus, nostril — and no shaft in the way.

Designed by piercers. Not by a factory.

KILA was designed in Italy by professional piercers — people who pierce for a living, and who had spent years working with needles designed by someone who never had.

That single fact explains everything else on this page. A factory optimises cost per unit. A piercer optimises the pass. The two lead to opposite decisions, and you can feel all three of them on the tray:

  • A silicone membrane over the steel. Coating a needle costs money. It also stops the drag, keeps the channel clean and makes the hand-off to the jewellery smooth. A piercer decides that is worth paying for. A purchasing department decides it is not.
  • Ethylene oxide, not gamma. EO sterilises at low temperature, so the bevel geometry and the coating come out exactly as they went in. Gamma is cheaper and harder on coatings. This is a choice made by someone who has felt the difference on the hundredth pass of the day.
  • Lot and expiry on every wrapper. Not on the box — on each of the hundred needles inside it. Printing a label on one carton is easy. Printing it a hundred times is what a piercer asks for, because the piercer is the one standing in front of a health inspector holding a single needle.

Certification and documentation

KILA carries an EU Declaration of Conformity, issued in Italy under Directive 2001/95/EC on general product safety. Risk analysis was carried out by the HAZOP method (IEC 61882:2016) and residual risk calculated by LOPA (IEC 61511-1:2016). Twelve-month warranty against manufacturing defects.

Both the declaration and the complete instruction manual are published on this site. You can read them before you order, not after it arrives.

Ask your current needle supplier for the same two documents. Most will not have them ready, and that tells you something.

Choose your length

KILA straight needles: 1 inch · 2 inches · 3 inches. Shaped needles in curved i hooked.

Storage and handling

Store between 18-22 °C at 35-50% relative humidity, indoors, away from steam, direct sunlight and heat. Check the expiry before use, open the wrapper at the moment of the procedure, and never let the tip touch a non-sterile surface. Single use, always.

KILA needles are a professional piercing tool, not a medical device, and are not intended for medical or aesthetic-medical treatments. For trained professionals only.

Download the documents

EU Declaration of Conformity (PDF) · Instruction manual, EN (PDF)

Dostava

Plavci iz Barcelone s DHL Expressom. Besplatna dostava širom svijeta na narudžbe iznad 350 eura.

Dodatne informacije

Mjerač

16G, 14G

Materijal

316L surgical steel

Duljina

25.4mm

Certifikati

Sukladnost kila igala

Priručnik za Kila igle IT-EN-ES

Najnoviji proizvodi

Tria 18K žuto zlato, bezžilni navoj s tri-korom u veličinama Big, Medium i Small
Novi

Tria – vrh od 18-karatnog zlatnog konca bez navoja

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Prsten s klikerom od 18-karatnog žutog zlata veličine 16 G s podesivim segmentom
Novi

Ring Clicker – 18K žuto zlato 16G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
2 mm 3-kraka vrh bez niti od žutog zlata 18 karata s smaragdno zelenim SW
Novi

Prong Push Pin – Emerald Green SW

2 mm 3-kraka vrh bez niti od žutog zlata s prirodnim rubinom
Novi

Prong Push Pin – Prirodni rubin

2mm 3-prstena vrh bez niti od žutog zlata 18K s bijelim SW-om
Novi

Prong Push Pin – Bijela SW

Trinity 18-karatni žuti zlatni nitni prsten s tri bijela moissanita u veličinama Big, Medium i Small
Novi

Trinity – Bijeli moissanit

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Altea 18K žuto zlato, bez navoja, s ručno izrađenim crvenim dijamantima i bijelim SW kamenjem
Novi

Altea – Amethyst SW

Altea 18K žuto-zlatan remen bez navoja s markiznim zupcima i bijelim i šampanjzimske SW-sjajne kamenje
Novi

Altea – Champagne SW

Najprodavaniji

Labret Push Pin Post 16G implantacijski titanski push pin labret post
Vruće

Pritisni pin za labret 16G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Labret Push Pin Post 16G implantacijski titanski push pin labret post
Vruće

Labret Post 16G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Implantni titanski klin za guranje Ball Push Pin, ASTM F-136 (bez navoja), vrh
Vruće

Kuglica za potiskivanje

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Implantni titanski prsten od 16G razreda ASTM F-136 s unutarnjim navojem
Vruće

Lopta 16G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Mikro labret push pin 20G (osnova 3 mm) (SAMO ZA POST) titanski push pin za labret, bočni pogled
Vruće

Mikro labret pribadača 16G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Mikro Labret Push Pin 20G (Osnova 3mm) (SAMO ZA POST) Titanski push pin za labret, zoom
Vruće

Mikro labret s unutarnjim navojem

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Titanijum za implantate Lilbit Push Pin, ASTM F-136, push pin (bez navoja) vrh
Vruće

Lilbit pribadača

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda
Mikro Labret Push Pin 20G (Osnova 3mm) (SAMO ZA POST) Titanski push pin za labret, zoom
Vruće

Mikro labret pribadača 18G

Registar Ovaj proizvod ima više varijanti. Opcije se mogu odabrati na stranici proizvoda